Frying problems: causes and remedies

Frying oil that foams, smokes or darkens quickly usually has one of a few causes: temperature that is too high, water in the oil, residue from food or cleaning agents, or the oil has reached the end of its life. Measure the TPM value first. The Austrian Food Code names 27 % polar compounds as a sign that a frying fat is spoiled. If your value is close to that, only an oil change helps.

Overview: problem, cause, first step

ProblemMost common causeFirst step
Oil foamstraces of cleaning agent, old oilmeasure the TPM value, rinse the fryer thoroughly
Oil smokestemperature too high, old oilcheck the temperature with a thermometer
Oil darkens quicklycharred residue, salt and spicesstrain every day, clean the heating elements
TPM value does not fallfilter pads not used daily or dosed incorrectlycheck the application point by point

Why does the frying oil foam?

A little foam when moist food is added is normal and collapses quickly. If the foam stays, there are two typical causes:

  • Traces of cleaning agent or soap. Even small amounts make the oil foam. After every cleaning, rinse thoroughly with clear water and dry the fryer before filling in fresh oil.
  • The oil is used up. The Austrian Food Code names persistent, thick foam when food is added as a sign of a changed frying fat. Measure the TPM value and change the oil if the value is too high.

Cover the fryer when it is cold. This keeps foreign matter out of the oil.

Why does the frying oil smoke?

According to the Food Code, fresh frying fat has a smoke point above 205 °C. It falls with use. Blue-grey smoke at 180 °C is regarded as a sign that the fat is spoiled.

  • Check the temperature with a thermometer. A faulty thermostat overheats the oil without being noticed.
  • Fry at 160 to 175 °C and no hotter.
  • Remove charred residue and clean the heating elements.
  • If the oil still smokes at normal temperature, change it.

Why does the oil darken so quickly?

Dark oil is a sign of breakdown, but not a reading. A TPM measurement gives you certainty. Typical causes:

  • crumbs and loose breading that char in the oil
  • salt and spices that fall into the oil above the fryer
  • deposits on the heating elements
  • temperature that is too high

Shake off breaded food before frying, season away from the fryer and run the oil through a straining cloth every day. All steps are in the guide Making frying oil last longer.

Why does the TPM value not fall despite filter pads?

The filter pads work mainly against new contamination. They keep the rise small when they are used correctly and every day. If there is no effect, check these points:

  1. Used every day? Place the pad in the clean, filtered oil in the morning and dispose of it in the evening when you drain or strain the oil. As a rule, use one pad per day. Only with short opening hours or little food to fry may a pad last two days.
  2. Dosed correctly? The guide value is 1 pad per 10 litres of oil. For a 5-litre fryer, cut the pad in half.
  3. Hot enough? The pads need hot oil. They work at normal frying temperature, that is at around 160 to 175 °C. They do not work in cold oil.
  4. Fully in the oil? The whole surface of the pad must lie in the oil, under the frying basket.
  5. Heating elements clean? Deposits on the heating elements put a constant strain on the oil. Clean the heating elements and the fryer thoroughly.
  6. Unusually heavy frying? On very busy days the value rises more than usual. Keep measuring on the following days.

Read how the pads work and how they differ from the powder under How Magnesol works. Go to the Solfina filter pads and Magnesol powder.

When does only an oil change help?

Change the oil when the TPM value approaches 27 %, or when it smells pungent, tastes harsh, smokes at normal temperature or foams thickly. Spoiled frying fat must no longer be used and must not be mixed with fresh oil either. More on the limit is under TPM value in frying oil. Where the old oil goes is explained under Disposing of used frying oil correctly.

Questions? Write to us at office@solfina.at or call +43 664 521 41 80. You will find more answers in the frequently asked questions.