Making frying oil last longer: a practical guide

Frying oil stays usable for longer when you control three things: the temperature, cleanliness, and everything other than food that gets into the oil. If you also care for the oil every day and measure the TPM value, you change oil based on a reading and not on a feeling. That means fewer oil changes and less waste oil.

What makes frying oil age?

Frying oil changes through heat and oxygen from the air. The Austrian Food Code notes that these changes take place not only during frying, but also when the fat stays in the fryer hot or, for a longer time, cold. The breakdown is accelerated by:

  • temperature that is too high
  • water and ice from the food
  • salt and spices in the oil
  • charred crumbs and residue
  • traces of cleaning agents

Guide: nine steps for daily work

  1. Keep to the temperature. Fry at 160 to 175 °C and no hotter. Check the thermostat with a thermometer from time to time.
  2. Turn down during breaks. Do not keep the fryer at full temperature for hours when nothing is being fried.
  3. Put food in dry. Pat moist food dry. Never tip frozen food into the basket above the fryer, so that no ice falls into the oil.
  4. Do not season above the fryer. Salt and season only after frying and away from the fryer.
  5. Fry small portions. As a guide, use no more than one part food to ten parts oil. This keeps the temperature from dropping sharply.
  6. Shake off crumbs. Loose breading chars quickly and puts a strain on the oil.
  7. Strain every day. At the end of the day, run the oil through a straining cloth. This removes residue before it chars.
  8. Keep clean and covered. Clean the fryer and the heating elements regularly. Rinse thoroughly so that no cleaning agent gets into the oil. Cover the fryer when it is not in use.
  9. Measure and record. Measure the TPM value every day and top up the oil level with fresh oil. More under TPM value in frying oil.

Straining is not enough: binding breakdown products

A straining cloth holds back crumbs. The dissolved breakdown products, that is polar compounds and free fatty acids, stay in the oil. They can be bound with an adsorbent. Magnesol is a magnesium silicate that binds these substances and is removed from the oil together with them. It is insoluble in oil, so nothing is added to the oil. Details are under How Magnesol works.

Solfina filter pads for the fryer

  • Guide value: 1 pad per 10 litres of oil per day. For a 5-litre fryer, cut the pad in half.
  • Place it in the clean, filtered oil in the morning, under the frying basket. The whole surface of the pad must lie in the oil.
  • During the day the pad works while you fry.
  • In the evening, when you drain or strain the oil, take it out with tongs, let it drain and dispose of it with residual waste.
  • The pads need hot oil. They work at normal frying temperature, that is at around 160 to 175 °C. They do not work in cold oil.
  • As a rule, use one pad per day. With short opening hours or little food to fry, a pad may last two days. Each business works this out for itself once at the start.

The pads work mainly against new contamination. There should therefore be a pad in the oil on every frying day. Go to the Solfina filter pads.

Magnesol powder for large oil volumes

  • Dosage: 10 g per litre of oil, once a day.
  • Add it to the hot fryer in the evening, in a filter box or stirred in directly.
  • Leave it to work overnight.
  • The next day, take out the filter box or remove the settled powder.
  • The powder is slightly cheaper than the pads, but it is more work.

Go to Magnesol powder.

When does the oil still have to be changed?

In Austria, the Food Code names 27 % polar compounds as a sign that a frying fat is spoiled. Change the oil before this value is reached. A pungent smell, blue-grey smoke at 180 °C or thick foam also show that the oil is finished. Hand in old oil separately. How to do this is explained under Disposing of used frying oil correctly.

Is it worth it for your business?

That depends on the number of fryers, the oil price and how often you change oil. Use the savings calculator to work through your own case. To try it out, there is the filter pad trial set. If foam, smoke or dark oil occur, see Frying problems.

Questions? Write to us at office@solfina.at or call +43 664 521 41 80.